A MECHANICAL ENGINEER
IS ABLE TO DO EVERYTHING
Hello! My name is Meysam Ghorbanpour. I am a mechanical engineer and designer living in Tehran, Iran.
Introduction
My name is Meysam Ghorbanpoor. I graduated from Shahid Beheshti University with a bachelor’s degree in Mechanical Engineering. Because of my interest in non-destructive testing, especially ultrasonic testing, I started studying this field. I studied an undergraduate course called Composite mechanics. That’s why I have become interested in composites. So, I entered the field of composite mechanical engineering to pursue a master’s degree. I have three years of experience working in the petroleum and aerospace industries as a designer, analyzer, and manufacturer. I have many experiences in Abaqus, Solidworks, and Matlab software, and I had some research experiences in guided wave ultrasonic tests and composite materials, especially composite pipes made by filament wounding.
Education
B.SC. |2012-2017| Shahid Beheshti university | Tehran | Iran
Field of study: mechanical engineering
Last 2-year GPA: 4.17/5 (16.67/20)
Thesis: Crack detection in condenser tubes using ultrasonic guided wave simulation.
M.SC. |2017-2020| Malek-e Ashtar University |Tehran | Iran
Field of study: mechanical engineering, composite approach
GPA: 4.24/5 (16.95/20)
Thesis: Numerical analysis and experimental investigation of parameters affecting the tolerance changes of composite cylinders under internal transient pressure.
Academic Experience
Title: Automation of production line of Iran Khodro Press Hall No. (1) including production steps of assembly, testing and installation of robots on the production line
Role in the project: Intern – Preparation and translation of IRB6400 robot operator instructions
Place and year: Iran Khodro Company – 2016
Title: Defect detection of a 1-inch condenser tube with ultrasonic guided wave
Role in the project: Intern – Making a setup and performing a guided ultrasonic test on a one-inch condenser tube
Place and year: Faculty of Mechanical Engineering – Shahid Beheshti University of Tehran – 2017
Title: Repair and Setting up of Krautkramer device for potential drop test (PD)
Role in the project: Intern – Preparation of instructions and standards for the Krautkramer device
Place and year: Faculty of Mechanical Engineering – Shahid Beheshti University of Tehran – 2017
The final project of the undergraduate degree
Title: Cracking simulation in condenser tubes using ultrasonic guided waves in Abaqus software
Place and year: Shahid Beheshti University of Tehran – 2016-17
Outline:
– Introduction to Ultrasonic – Guided Waves
– Dispersion analysis
– Simulation of plane wave propagation by finite element method
– Select the appropriate mode and frequency for detecting cracks
The final project of the master’s degree
Title: Numerical analysis and experimental study of parameters affecting the radial displacement changes of composite pipes under internal transient pressure
Place and year: Malek Ashtar University of Technology, Tehran 2019-20
Outline:
– Replacement of polymer composite pipes with metal ones
– Investigation of effective factors on increasing the flexural modulus of the composite
– Control of change of geometric tolerances under internal transient pressure
– Simulation and testing of 600 bar composite pipe with internal pressure
Work Experience
Title: Design and construction of safety shower (Safety Shower) platforms for phase 14 of South Pars
Role in the project: Project advisor- Designer and installation of the showers
Place and year: Shahir Sanat Kish Company – 2018
Title: Design and construction of CCTV with movable solar panel
Role in the project: Project advisor – Designer
Place and year: Shahrir Sanat Kish Company – 2019
Title: Optimization of compressor blade profile
Role in the project: Analyst and programmer with ABAQUS and MATLAB
Place and year: Shahrir Sanat Kish Company – 2019
Title: Weight reduction of Endress Hauser Temperature Transmitter TR62
Role in the project: Designer
Place and year: Shahir Sanat Kish Company – 2019
Title: Design and manufacture of NDE and DE bearings
Role in the project: Designer of Bearing shell
Place and year: Shahir Sanat Kish Company – 2019
Title: Design and construction of towpreg pilot production line
Role in the project: Project advisor – designer
Place and year: Malek Ashtar University of Technology – 2020
Title: Design and construction of UAV ground control station (GCS)
Role in the project: Project advisor – Design and construction of the GCS body
Place and year: MotionUAV Company – 2018-19
Title: Design and manufacture of Avionic equipment
Role in the project: Project advisor – design and construction
Place and year: MotionUAV Company – 2020
Title: Design and construction of Firefighter UAV’s release mechanism
Role in the project: Project advisor – Design and construction of mechanisms
Place and year: MotionUAV Company – 2020
Title: Design and construction of a prototype of a native radio control
Role in the project: Project advisor – Design
Place and year: MotionUAV Company – 2020
Title: Design and manufacture of cable reel
Role in the project: Designer
Place and year: Persian Nevisa Company – 2021
Title: Design and manufacture of industrial cable reel
Role in the project: Designer
Place and year: Persian Nevisa Company – 2021
Title: Design and construction of composite prepreg with ceramic coating line production.
Role in the project: Project advisor- Designer
Place and year: 2022
Title: Design and construction of composite prepreg line production.
Role in the project: Project advisor- Designer
Place and year: 2021-22
Skills
Honour and Rewards
- Excellent student PhD Admission offer to the university of Malek-e Ashtar university of technology, Tehran, 2018
- Ranked 2nd among all master mechanical engineering composites, Malek-e Ashtar University, Tehran, Iran, 2019
- Ranked 1st place in the industrial section of 2nd international heat treatment competition, Kerman, Iran, August 2019
Article
- Article: M. Ghorbanpoor, M. Soorgee,” Selecting the appropriate mode and frequency for crack detection in a condenser tube using ultrasonic guided wave” in 7th international conference on acoustics and vibration, Tehran, Iran, 2017
References
Dr M.H. Soorgee, assistant professor in the department of mechanical engineering, Shahid Beheshti University, Tehran, Iran.
E-mail: mh_soorgee@sbu.ac.ir
Dr M. Sameezadeh, assistant professor in the department of mechanical engineering, Shahid Beheshti University, Tehran, Iran.
E-mail: m_sameezadeh@sbu.ac.ir
Dr J. Eskandari Jam, a professor in the Department of Composite Materials and Technology Center, Malek Ashtar University of Technology, Tehran, Iran.
E-mail: Eskandari@mut.ac.ir
Meysam Ghorbanpour 